> ePaint antifouling coatings contain U.S. EPA approved actives to prevent growth from attaching.  ePaint has made a conscious effort to formulate only with actives that break down quickly and do not persist in the environment.  ePaint antifouling paints are formulated with either Zinc Omadine® or SeaNine 211N™ to effectively prevent bio-fouling in a responsible manner.  These actives comprise less than 5% by weight of the coatings dry film, compared with 40-75% cuprous oxide found in traditional antifouling paints.

• 

  ECOMINDER Antifouling Paint

  $199.95 per gallon
  
  

• 

  EP-2000 Antifouling Paint

  $275.95 per gallon

EP-21 Release - selected for the San Diego Port Shelter Island program

EP-21 Release  $167.95 per gallon

For more product information go to:

http://www.epaint.com/products

AirMaax High Output Wind Turbine

 

The AirMaax wind turbine is the ONLY wind turbine on the market that has a factory integrated Amp meter and data logger built into its included charge regulator.  The regulator not only gives you real time Amp data, but also records the daily Amps produced by the wind turbine, which helps the cruiser have a better understanding of his ships charging system and available battery power.  This feature also means that you can trust the output performance data we provide because you will be able to see exactly how many Amps are being produced at a glance!

A unique feature of the AirMaax design is that the wind turbine produces AC power in the wind turbine (as others do) but then rectifies the power to 12volts DC at the regulator rather than in the wind turbine.  This allows for the use of much smaller (and less expensive) electrical cables from the wind turbine to your regulator located near your battery bank, saving on voltage loss and putting more power into your batteries.  The regulator controls the wind turbines output to maintain maximum power going to your batteries, as well as having the ability to float your batteries when they reach full charge. 

ElectroMaax designed the AirMaax wind turbine for optimal performance in the wind speed range most typically experienced by cruisers, 8 to 20 knots.  The 6 blade design is able to not just start spinning in lighter winds than other units, but actually produce useful amounts of power in the lower wind speeds.  It’s nice to have a wind turbine that can put out a lot of Amps during a 37 knot gale, but how often does a cruising boat experience those types of winds?  Not very often if you want your wife to stay out cruising with you!  The cruiser cares about the Amp output in typical every-day winds experienced in a nice comfortable anchorage, which are 8 to 20 knots.

Specifications:

• 3 Year Warranty
• 59” blade diameter
• Mounts on a 2 inch to 2 ¼ inch pole
• Weight 20.3lbs (9.2 kilos)
• 360 degrees of wind direction rotation for optimal performance
• Carbon Fiber reinforced blades computer designed for low noise with UV protection
• Neoprene gaskets around key components to eliminate vibration transfer noise to mounting pole
• Included Regulator that can also accept up to 180W of solar panels
• Integral Amp meter with data logging capabilities for total power produced on a daily basis
• Stainless steel turbine shaft with dual heavy duty sealed bearings
  
• Turbine body is powder coated cast aluminum for durability at sea
  
• Regulator can send power to two different battery banks (starting and house battery for example)
• 100% North American parts and made in Canada
• Blades can be replaced individually while maintaining turbine balance
  

List Price is $2295  Call for Introductory Price